ASPIRE SPRYTE AIO KIT

ASPIRE SPRYTE AIO KITAnother great AIO pod system from Aspire. This slim and stylish kit comes in 5 satin finishes: olive green, grey, black, blue and purple. The Spryte has an easy-to-fill 3.5ml or 2ml pod, and fits comfortably and discreetly in the hand. It utilizes Aspire’s well-known BVC coils and comes with a regular 1.8ohm coil and a second 1.2ohm for use with nicotine salts.
Features:

• Sleek minimalist design that fits well in the pocket or a purse.
• Protective top cap fits snugly to the bottom of the device when in use.
• Built-in Battery at 650mAh with
• Micro USB cord to charge
• Adjustable airflow

Package Includes:

• 1 x Spryte AIO
• 2 x Extra O-rings
• 2 x coils (1.8ohm regular BVC
• and 1.2ohm for nic salt)
• 1 x Silicone seal
• 1 x Micro USB Cord
• 1 x Warranty Card
• 1 x User Manual

Coil Installation:Whichever type of coil you decide to use, the standard BVC or nic-salts BVC (1.2ohm), they are both easy to install.

1. Remove the pod and turn it upside down
2. Remove the chimney unit and screw in your favourite coil.
3. Replace the chimney unit with attached coil and re-insert into pod.
4. Push pod back into the Spryte until it clicks.

PLEASE ADVISE: When inserting a new coil, always let the device stand for a few min to allow the coil to be saturated. This will prevent the coil from being damaged.
How to Fill Device:

1. Remove the pod and turn it upside down
2. Remove the silicone plug from the 4.6mm diameter filling hole.
3. Fill pod with e-liquid and push silicone plug back in securely.
4. Place pod into device by pushing down until it clicks into place.

How to Charge:

1. Plug the supplied mico USB cable into base of the mod
2. When attached to the USB with the power on, the LEDs will flash blue and red three times.
3. When fully charged the LEDs will flash blue and red twenty times and then remain off.